Motis Entry Kit
Motis Fire Rescue
The Motis Entry Kit is jam packed with tools for both respectful entry (non-destructive) and forcible entry (you’re going to need a new door). All kit contents fit easily in the 15” Motis Utility Bag.
Kit Contents:
• Heavy Hitter Wedge
• 2-pack Motis Wedges (Red)
• Hex Set
• J-Tool - Double Door Tool (may be black or silver)
• Key Tool
• Doorjamm
• Loid Entry Tool
• Shove Tool
• Pry Bar
• 6 3/4" Angle Nose Pliers
• Fire Alarm Reset Screwdriver (flat head)
• Motis Utility Bag (15")
Heavy Hitter Wedge:
The Motis Heavy Hitter forcible entry wedge is designed to get the job done! Longer and wider than the normal Motis wedge, the heavy hitter wedge also features a machined pattern on the sides for better grip and smooth wedge faces. Raw aluminum finish. Approx. 5.125" Long x 1.5" Wide.
Forcible Entry Wedge:
• Two (2) wedges (Red)
• Constructed from 6061 T6 Aluminum
• Curved shape for maximum effectiveness when forcing a gap
• Approx. Dimensions: 4.5" long x 1" Thick
Motis Hex Set:
• 9 piece allen/hex key wrench set
• Hex sizes: 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, and 1/4″
• Made in the USA
J-Tool (Double Door Tool):
• Designed as a soft (non-destructive) double door entry tool
• Used in the gap between commercial double doors to activate the panic bar
• Dimensions: 12.5” x 6.75”
• Random Color (black or silver)
Key Tool:
After pulling the lock cylinder, the key tool can be inserted in the lock mechanism to manipulate the lock bolt to the open position. Made from 1/8" stainless steel.
Motis Doorjamm:
The Motis Doorjamm is Made in America and is constructed from a flexible material that can stretch over 200% its original size to fit most types of doors and gates. The DoorJamm is a convenient tool to prevent doors and gates from closing behind you.
Loid Entry Tool:
Compact, lightweight, and includes a rubberized handle and pouch. The Loid Tool is laser cut in the US and made with US steel. The Motis Loid Tool is strong, but flexible entry tool that allows you to use respectful entry techniques to prevent property damage.
The steel used in the Loid Tool provides lots of flex and will “bounce back” to its original shape after use. To have these properties, the steel is prone to rusting. Always ensure you dry the Loid Tool if it gets wet and apply a light coat of oil before storage. Overall dimensions are 8.125” long x 4.75” wide (blade is 1.125” wide)
Shove Tool:
The design allows the shove tool to work from either side of the door. If the door opens inwards, you shove the tool in back of the molding stop and retract the latch. For doors that open towards you, the tool is slipped in from above or below the latch point and then pulled to retract the latch.
Pry Bar:
Great little pry bar for forcible entry and general prying applications.
• 8" overall length
• 4” handle length
• Steel cap on handle end
• 1/2″ Tip
• Black Oxide Coating
6.75” Angle Nose Pliers:
The compact size makes these pliers great addition to bunker gear, gear bags, tools bags, or to leave in your vehicle.
• Made in the USA
• Compact angle nose for tight spaces
• Integrated shear/wire cutter
• Slip joint pliers
• Black oxide finish
Fire Alarm Screwdriver:
• Reset fire alarms with our Motis flat head screwdriver.
• Great, economical screwdriver with bright yellow handle.
• Approx 5 1/2" Total Length
• Weight: 0.5 oz
Motis 15” Utility Bag:
• The perfect size bag to hold all the contents of the Motis Entry Kit.
• Laser cut Molle on the exterior for additional equipment carrying options
• Made of 600D Nylon fabric