Snap-Tite Gladiator (FG) Hose

Polyester Double Jacket - Nitrite rubber (Thru-the-Weave)

Snap-Tite's Gladiator Attack Hose is one of the leading attack lines in the industry. Built to last, the rugged hose is constructed with an extruded thru-the-weave nitrile rubber liner with a durable outer polyester jacket providing incredible strength and long-lasting performance. Gladiator hose performs well at high or low pressures, has a smooth and enhanced waterway for better flows and less kinking than other attack hose on the market. Both the nitrile-thru-the-weave inner lining and outer jacket are proudly made at our factories in Pennsylvania, USA.

 

Innovative Design
When subjected to a static pressure of 100 PSI shall be capable of safely with-standing a surface temperature of 1200º F (648º C) applied by a hot metal cube for a minimum of 45 seconds without bursting.

Dura-Cote:  Treatment extends the life of the hose and greatly increases abrasion, heat, flame and petrochemical resistance while virtually eliminating water pick-up.  Also protects from mildew and no drying is required.

Construction
•   Extruded thru-the-weave nitrile rubber liner with a durable outer polyester jacket
•   Service Test Pressue of 500 PSI, making it a very durable and reliable hose.
•   Highly resistant to ozone and oxidation
•   Kink resistance exceeds that of lightweight jacketed hose
•   Suitable for use with CAFS and foam solutions.
•   Certified and manufactured in accordance with NFPA 1961 Standard, latest edition within our ISO-9001 certified quality assurance system.

Temperature Range: Remains flexable as low as -40° to 150°F (-40° to 65°C)

Hose Lengths: 50 ft. and 100 ft. standard. Contact Us to discuss custom lengths.

Standard Hose Colors: Yellow, Red, Blue, Orange, Green, White.

Special Order Hose Colors: Tan and Purple (200 ft. min. qty. same color)

Couplings:
•   Aluminum Rocker Lug - NH/NST thread
•   IPT thread is available for rocker lug threaded couplings. Contact Us for pricing.

Customized Hose Stenciling:
•   Standard stenciling of hose is per NFPA 1961 (mfg, country origin, month & year of mfg.and service test psi)
•   Custom stencils in addition to NFPA stenciling available
•   Custom stencils (max. 25 characters at 2 places on hose). No additional charge
•   Longer and/or more frequent custom stenciling available. Contact Usfor pricing.

SNAP-TITE GLADIATOR HOSE SPECIFICATIONS
HOSE SIZE	COUPLING SIZE	COUPLING MATERIAL	SERVICE TEST	PROOF TEST	BURST	WEIGHT (50 FT. COUPLED)
Inches	Inches		PSI	PSI	PSI	Pounds
1.75"	1.5" NH	Aluminum	500	1000	1,500	19
2"	1.5" NH	Aluminum	500	1000	1,500	24
2"	2.5" NH	Aluminum	500	1000	1,500	25
2.5"	2.5" NH	Aluminum	500	1000	1,500	26

View Snap-Tite Gladiator Product Data Sheet [PDF]

Notes:
•    As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.

SHIPPING NOTE: Due to the size/weight and potential large quantity orders of this product shipping will be quoted on a per order basis.  You may complete your order online, however there will be no shipping charges displayed at checkout.  A First Out Rescue specialist will contact you to provide you with the final cost for your order including freight charges and to make delivery arrangements.