Plastic Rescue Stretcher
One Piece Stretcher - Yellow high-density polyethylene shell, supported by a stainless steel outer rail, permanently attached with stainless steel semi-tubular rivets. Features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. Ideal for unusually rugged rescue situations such as industrial, mining or construction. Four straps are standard.
Two Piece Stretcher - The same construction as the One Piece Stretcher, the two-piece stretcher is designed for transport to remote locations where lengthy foot travel is required. The stretcher breaks into two halves which can be back-packed to the point of rescue and assembled in seconds. Positive-locking quick-release pins secure two halves together. Four straps are standard.
• Dimensions: 84 ½” L x 24" W x 7 ½” H
• Weight: One Piece: 31 lbs. Two Piece: 32 lbs.
• Load Capacity: 1,200 lbs.
Optional Lifting Bridle Provides for horizontal or vertical lifting.
Nylon Bridle with Forged Hooks
• 1" nylon webbing w/ Forged snap hooks
• 3" ID forged steel suspension ring
• Dimensions: 35 ¼”H x 18 7/8”W x 22 3/8” D
• Load Capacity: 2,500 lbs.
Nylon Bridle with Carabiners
• 1" nylon webbing w/ Carabiners
• 3" ID forged steel suspension ring
• Dimensions: 35 ¼”H x 18 7/8”W x 22 3/8” D
• Load Capacity: 2,500 lbs.
Stainless Steel Cable Bridle with Carabiners
• Stainless Steel Cable w/ Carabiners
• 3" ID forged steel suspension ring
• Dimensions: 35 ¼”H x 18 7/8”W x 22 3/8” D
• Load Capacity: 4,000 lbs.
SHIPPING NOTE: Due to the size/length of the JSA-200 stretchers, oversized shipping charges are applied by shipping carriers. You may complete your order online, however there will be no shipping charges displayed at checkout for the JSA-200 series stretchers. A First Out Rescue specialist will contact you to make delivery arrangements and provide the final cost for your order including shipping/freight charges.