CET High Volume Pump - 2HP - 85GPM

2 HP – 850 GPM - Single 1.5" Discharge

This is the smallest, lightest pump in the CET line up.  It is extremely easy to transport and will allow you to access remote locations that are not practical to access with larger pumps.  
That pump is offered in a hand carry/mountable version or as a backpack configuration for easy transport to remote locations.

Pump Specifications: 
•    Direct drive single stage centrifugal pump
•    Pump body made from resistant aluminum alloy
•    Aluminum impeller
•    Mechanical shaft seal
•    Hand priming system; guaranteed up to 6’ (2 m) lift
•    One 1 1/2“ (38 mm) delivery outlet with 1/4-turn ball valve
•    One 1 1/2“ (38 mm) suction inlet

Pump Performance:
•    Max Flow: 85 GPM
•    Max. Pressure: 80 PSI
•    75 GPM @ 15 PSI
•    65 GPM @ 25 PSI
•    45 GPM @ 50 PSI
•    15 GPM @ 75 PSI

Engine Specifications: 
•    GXH50 Honda 2 HP air cooled engine
•    Single cylinder, 4-stroke gasoline engine
•    Recoil start
•    Low oil alert
•    0.2 gallon (0.77 l) integrated fuel tank

Dimensions: 
•    Length: 13“ (330 mm);
•    Width: 12“ (305 mm); Height: 16“ (406 mm)
•    Mountable version wet weight : 21.3 lbs. (9.7 kg)
•    Backpack version wet weight : 25.3 lbs. (11.48 kg)

Limited Warranty:
•    3 YEARS for pump components
•    1 YEAR for engine components

Note: PSI & GPM specifications shown are at the pump. Actual performance may vary based on:
• Throttle setting
• Air temperature
• Altitude
• Hose lengths