ATT-ET-4.0 Low Pressure Simo Accelerator Pump
ALL TNT Rescue tools and pumps are fully compatible with Hurst, Genesis, Holmatro and Amkus equipment. Use your current pump with TNT Rescue Tools or use your existing Rescue Tools with a TNT Pump, your choice.
100% interchangeable and 100% Lifetime warranty on all TNT Rescue Equipment.
ATT-ET-4.0-LP Accelerator Power Unit (Electric Motor)
• Phosphate Ester or Diethylene Glycol Hydraulic Oil 5,500 PSI (379 BAR)
• Two-tool simultaneous operation, or single tool operation at twice the speed
• Supercharged Hydrostatic 2 stage radial piston pumps
• True Simo unit with two separate pumps sharing one reservoir
• Roll cage
• Leeson electric motor
• Standard Couplers
| ATT-ET-4.0-LP Accelerator Specifications | |
| Max. Operating Pressure | 5,500 psi / 379 bar |
| Length | 24 in. / 609.6 mm |
| Width | 15.5 in. / 393.7 mm |
| Height | 14.5 in. / 368.3 mm |
| Weight | 104 lbs. / 47.2 kg |
| Motor | 3.5 HP Leeson Electric (Fan Cooled) |
| Voltage | 220 Volt |
| Min. Run Watts | 5000 |
| Min. Start Watts | 7,500 |
| Max. Amp Draw | 17 Amps |
| RPM | 3,450 |
| Hydraulic Pump | 2 Stage Radial Piston Over Piston |
| Tool Operation | 2 Tool Simultaneous Operation |
| NFPA 1936 2010 Edition Compliant | Yes |
| Simultaneous Mode (Per Tool) | |
| 1st Stage Setting | 5,500 psi / 379 bar |
| 1st Stage Flow | 245 cu in./min - 4,014.8 cc/min |
| Simultaneous Mode (Per Tool) | |
| 2nd Stage Setting | 5,500 psi / 379 bar |
| 2nd Stage Flow | 490 cu in./min - 8,029.6 cc/min |
SHIPPING NOTE: Due to the size/weight of this product, shipping/truck delivery must be arranged by phone or email. You may complete your order online, however there will be no shipping charges displayed at checkout. A First Out Rescue specialist will contact you to make delivery arrangements and give you the final cost for your order including freight charges.