Welcome to First Out Rescue!

Caps, Elbows & Plugs

Elbows are available from Kochek in traditional threaded, Storz and combination elbows up to 6 inch in sizes. Caps are available in aluminum construction to reduce weight and come with your choice of a chrome finish or anodized finish.

Grid List

Set Descending Direction

14 Item(s)

  1. TFT High Rise 45 Degree Elbow

    Starting at: $825.00

    TFT’s 45-degree hiGH rise standpipe elbow is available with a choice of a left-handle or right-handle slow close valve, or no valve. The full 2.5” (64 mm) waterway allows for maximum flow with minimal friction loss.

     

     

    For elbows equipped with the slow close valve, the valve includes a position indicator that identifies the valves open or closed positions. The slow close valve prevents water hammer and allows fine-tuning of the water supply exiting the standpipe. The waterway includes an air bleeder and a protected inline pressure gauge that reads 0 – 200 psi (0-14 bar).

    The inlet valve body of the waterway swivels 360 degrees before tightening and the body of the inline pressure gauge always swivels 360 degrees for easy connection. The 45-degree angle allows for adaptable installation and helps position the attack hose to prevent kinks.

    •    Coupling Side A: 2.5" (65mm) Non-Full Time Swivel Female
    •    Coupling Side B: 2.5" (65mm) Rigid Male
    •    Body Material: Aluminum
    •    Pressure Relief Valve: No
    •    Air Bleeder Valve: Yes
    •    Pressure Gauge Range: 0-200 PSI (0-14 BAR)
    •    Individually serial numbered
    •    Five-year warranty

    Weights:
    •    No Valve: 7.75 lbs.
    •    With Valve: 9.15 lbs.

     Elbow is available as part of complete High Rise Kit HERE

    Learn More
  2. 30 Degree Lightweight Elbow
    $133.00

    •   NH Female Swivel Rocekr Lug X NH Male
    •   30° lightweight elbow
    •   Standard thread is NH
    •   Available in 1.5” through 6” sizes

    Specialty threads available and can also be specified as increaser or reducer. Contact Us to discuss your needs.

    Learn More
  3. 45 Degree Lightweight Elbow
    $137.00

    •   NH Female Swivel Rocekr Lug X NH Male
    •   45° lightweight elbow
    •   Standard thread is NH
    •   Available in 1.5” through 6” sizes

    Specialty threads available and can also be specified as increaser or reducer. Contact Us to discuss your needs.

    Learn More
  4.  30 Degree Elbow - Storz to Swivel Female
    $159.00

    •    30° Elbow
    •    Hardcoat finish
    •    Machined from tough extruded 6061-T6 aircraft aluminum alloy
    •    Threaded Swivel Female to Storz with 30 Degree Elbow
    •    2.5” to 6” threaded swivel female
    •    National Hose (NH)/National Standard Thread (NST) are standard
    •    Swivels are attached with a piston ring, stainless steel balls or roller bearings
    •    No roll-over or still threads are ever used to attach swivels

    Special Threads:
    •    National Pipe Straight Hose – NPSH
    •    Tapered Pipe Thread – NPT
    •    NPT cannot be furnished on a swivel
    •    Contact Us for special thread pricing

    Learn More
  5.  30 Degree Elbow - Storz to Long Handle Swivel Female
    $173.00

    •    30° Elbow
    •    Hardcoat finish
    •    Machined from tough extruded 6061-T6 aircraft aluminum alloy
    •    Threaded Long Handle Swivel Female to Storz with 30 Degree Elbow
    •    2.5” to 6” threaded swivel female
    •    National Hose (NH)/National Standard Thread (NST) are standard
    •    Swivels are attached with a piston ring, stainless steel balls or roller bearings
    •    No roll-over or still threads are ever used to attach swivels

    Special Threads:
    •    National Pipe Straight Hose – NPSH
    •    Tapered Pipe Thread – NPT
    •    NPT cannot be furnished on a swivel
    •    Contact Us for special thread pricing

    Learn More
  6. 30 Degree Elbow - Swivel Storz to Rigid Storz

    Starting at: $194.00

    •    Swivel Storz to Rigid Storz
    •    30 degree elbow
    •    2.5" to 6” Storz

    Learn More
  7. Suction Elbow
    $314.00

    Because suction hose does not like to bend around corners, the 90 degree suction elbow from Kochek helps to position hard suction hose for drafting operations.  The suction elbow allows you to position hard suction parallel to the apparatus and is particularly useful for single lane drop tank operations on narrow roads where the need to keep an open traffic lane is critical to tanker/tender operations.

    Unlike traditional 90 degree suction elbows, the suction elbow from Kochek utilizes a sweeping design with a 45 degree transition to help reduce friction loss and maximize flow.

    Available Thread Sizes:
    •    4” NH
    •    4 ½” NH
    •    5” NH
    •    6” NH
    Note:  NH Threads are standard.  NST, NPSH, NPT and Storz are also available.  Contact First Out Rescue for pricing.


    Swivel Style:
    •    Rocker Lug  - Rocker Lug Swivel Elbow Drawing [PDF]
    •    Long Handle - Long Handle Swivel Elbow Drawing [PDF]





    Learn More
  8. Fire Hydrant Flush Elbow
    $213.00

    The use of a Fire Hydrant Flush Elbow is essential for diffusing water from a hydrant to prevent damge to pavement and landscaping. This light weight elbow/strainer combination is tough enough to take years of abuse. The elbow, basket flange and swivel are all made from 6061-T6 aircraft aluminum that has been hard coated to provide extra resistance from abrasion and abuse.

    The basket material is made from a stainless steel mesh, providing ample diffusion as the water
    leaves elbow. Available in 2-1/2" Rocker Lug Swivel Female (NH threads).

    Learn More
  9. Rocker Lug Cap - Hardcoat Finish

    •    Solid one-piece design
    •    Made of extruded 6061-T6 aircraft aluminum alloy.
    •    Sizes: 1” To 6”
    •    Hard-coat finish
    •    Available with or without 12” stainless steel chain

    Special Threads:
    •    National Pipe Straight Hose - NPSH
    •    Tapered Pipe Thread – NPT
    •    Contact Us for special thread pricing


    Learn More
  10. Rocker Lug Cap - Chrome Finish

    •    Solid one-piece design
    •    Made of extruded 6061-T6 aircraft aluminum alloy.
    •    Sizes: 1” To 6”
    •    Bright Chrome finish
    •    Available with or without 12” stainless steel chain

    Special Threads:
    •    National Pipe Straight Hose - NPSH
    •    Tapered Pipe Thread – NPT
    •    Contact Us for special thread pricing


    Learn More
  11. Long Handle Cap
    $98.00

    •    Solid one-piece long handle design
    •    Made of extruded 6061-T6 aircraft aluminum alloy.
    •    Sizes: 4” To 6”
    •    Hard-coat or chrome finish
    •    Available with or without 12” stainless steel chain

    Special Threads:
    •    National Pipe Straight Hose - NPSH
    •    Tapered Pipe Thread – NPT
    •    Contact Us for special thread pricing


    Learn More
  12. Storz Cap
    $41.00

    •    Constructed from 6061-T6 high-strength aluminum alloy
    •    Hard Coat finish
    •    Hard Coat meets MIL-A-8625 Type III Class 1
    •    Locks supplied on 4" Storz or larger
    •    2.5" and 3" caps supplied with chain
    •    4"-6" caps supplied with cable

    Threads:
    •   Standard thread is National Hose (NH), also called National Standard Thread (NST)
    •   Tapered Pipe Thread (NPT) also available. Please Contact Us for pricing

    Learn More
  13. Rocker Lug Plug - Hardcoat Finish
    $21.00

    •    Solid one-piece design
    •    Made of extruded 6061-T6 aircraft aluminum alloy.
    •    Sizes: 1” To 6”
    •    Hard-coat finish
    •    Available with or without 12” stainless steel chain

    Special Threads:
    •    National Pipe Straight Hose - NPSH
    •    Tapered Pipe Thread – NPT
    •    Contact Us for special thread pricing


    Learn More
  14. Rocker Lug Plug - Chrome Finish
    $47.00

    •    Solid one-piece design
    •    Made of extruded 6061-T6 aircraft aluminum alloy.
    •    Sizes: 1” To 6”
    •    Chrome finish
    •    Available with or without 12” stainless steel chain

    Special Threads:
    •    National Pipe Straight Hose - NPSH
    •    Tapered Pipe Thread – NPT
    •    Contact Us for special thread pricing


    Learn More

Grid List

Set Descending Direction

14 Item(s)