Welcome to First Out Rescue!

Streamlight ProPolymer

The Streamlight ProPolymer is one of the most popular handheld flashlights in the fire/rescue service today. The virtually indestructible polymer body makes it perfect for the harsh conditions encountered on the fireground. Available in your choice of 2AA, 3AA, and 3C batteries models.

Grid List

Set Descending Direction

6 Item(s)

  1. Streamlight 2AA ProPolymer HAZ-LO

    Starting at: $20.35

    The 2AA ProPolymer® HAZ-LO® is an intrinsically safe, extremely durable, waterproof alkaline battery-powered flashlight.ᅠ This light offers a push-button tail switch for momentary on on-off operation.ᅠ This light uses affordable, easy-to-find "AA" alkaline batteries.ᅠ

    • 65 lumens; 2,300 candela; 96m beam distance
    • Run time: 24 hours
    • Housing:ᅠ Impact resistant polymer
    • Facecap: Impact resistant polymer over molded onto polycarbonate lens.
    • Length:ᅠ 6.40 in. (16.26 cm)
    • Major Diameter:ᅠ 1.32 in. (3.35 cm)
    • Body Diameter:ᅠ 0.89 in. (2.26 cm)
    • Weight:ᅠ 3.6 oz (100 grams) with batteries
    • Light Source C4® LED technology, impervious to shock with a 50,000 hour lifetime
    • Switch Push-button tail switch. One handed momentary or constant "on" operation
    • Battery Two "AA" alkaline batteries (included)
    • Sealed construction; IPX7 rated design; waterproof to 1 meter for 30 minutes
    • 1 meter impact resistance tested
    • Wrist lanyard connection and integrated pocket clip
    • Colors: black or yellow


    Approvals:
    ᅠC-SGS-US Class I, II, Division 1, Groups A, B, C, D, E, F, G; Class III; T-Class: T4
    (approved for use with Energizer E91, Duracell MN1500 and Rayovac NO.815)

    MSHA Permissible Flashlight. Approval No. 20-A140002-0. Tested for Intrinsic Safety in Methane-Air mixtures only.(approved for use with Energizer E91, Duracell MN1500 and Rayovac NO.815)

    Learn More
  2. Streamlight 3AA ProPolymer HAZ-LO

    Starting at: $45.00

    The 3AA ProPolymer® HAZ-LO® is an intrinsically safe, high performance, 3 AA Alkaline powered C4® LED flashlight. It features a sealed tail switch, integrated & retained facecap lock and mechanical battery polarity protection. The body is constructed of an engineered polymer resin that is virtually indestructible, shock resistant, anti-static, non-conductive and light weight. This light uses affordable, easy-to-find “AA” alkaline batteries.

    • Provides 120 lumens
    • Run time: 6.5 hours
    • Housing: Impact resistant polymer resistant to chemicals
    • Facecap: Impact resistant polymer, O-ring sealed and vented
    • Unbreakable polycarbonate lens with scratch resistant coating
    • Length: 7.00 in. (17.78 cm)
    • Body thickness: 1.05 in. (2.67 cm)
    • Width: 1.50 in. (3.81 cm)
    • Face cap diameter: 1.93 in. (4.90 cm)
    • Weight: 7.5 oz (213 grams) with batteries
    • Light Source C4® LED technology, impervious to shock with a 50,000 hour lifetime
    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
    • Regulated run time provides consistent performance throughout battery life
    • Push-button tail switch. Sealed switch design protects it from corrosion caused by battery leakage
    • Battery: 3 “AA” alkaline batteries reduce battery and recycling costs by 25%
    • Combination of visual & mechanical polarity protection ensures correct battery installation
    • Light designed to not power on if batteries are installed incorrectly
    • “Captured locking” set screw helps avoid batteries being changed out, or housing inadvertently being opened in a hazardous environment
    • Set screw goes into metal tray that evenly distributes pressure to protect the body from over-tightening
    • IP64/IPX7 rated; dust-tight, waterproof to 1m for 30 minute
    • 3 meter impact resistance tested
    • Colors: yellow, black or orange

    Learn More
  3. Streamlight 4AA ProPolymer LUX

    Starting at: $38.00

    The 4AA Propolymer® LUX is a high performance, 4 AA Alkaline powered, C4® LED flashlight. It features momentary or constant on operation. The body is constructed of a engineered polymer resin that is virtually indestructible, shock resistant, non-conductive and light weight. The case is O-ring sealed and water proof.

    • Provides 100 lumens (4,200 Candela)
    • Run time: 6 hours
    • Housing:ᅠ Impact resistant polymer resistant to chemicals
    • Facecap: Impact resistant polymer, O-ring sealed
    • Unbreakable polycarbonate lens with scratch resistant coating
    • Length:ᅠ 7.00 in. (17.78 cm)
    • Body thickness: .97 in. (2.46 cm)
    • Width: 1.35 in. (3.43 cm)
    • Face cap diameter: 1.69 in. (4.29 cm)
    • Weight:ᅠ 7.5 oz. (213 grams) with batteries
    • Light Source C4® LED technology, impervious to shock with a 50,000 hour lifetime
    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
    • Switch Push-button tail switch. One handed momentary or constant "on" operation
    • Battery Four "AA" alkaline batteries (included)
    • Sealed construction:ᅠ IP67 rated design
    • Waterproof to 1 meter for 30 minutes
    • 1 meter impact resistance tested
    • Non-conductive
    • Colors: black or yellow


    Approvals:ᅠ
    DIVISION 2:ᅠ UL Listed Class I, Division 2, Groups A, B, C & D;Class II, Division 2, Groups F & G; Class III; Temperature Code T3C

    Learn More
  4. Streamlight 3C ProPolymer HAZ-LO

    Starting at: $48.00

    The 3C ProPolymer® HAZ-LO® is an intrinsically safe, high performance, 3 C Alkaline powered C4® LED flashlight. It features a sealed tail switch, integrated & retained facecap lock and mechanical battery polarity protection. The body is constructed of an engineered polymer resin that is virtually indestructible, shock resistant, anti-static, non-conductive and light weight. This light uses affordable, easy-to-find “C-Cell” alkaline batteries.

    • 150 lumens
    • Run time: 18 hours
    • Housing: Impact resistant polymer resistant to chemicals
    • Facecap: Impact resistant polymer, O-ring sealed and vented
    • Unbreakable polycarbonate lens with scratch resistant coating
    • Length: 9.30 in. (23.62 cm)
    • Body diameter: 1.46 in. (3.71 cm)
    • Face cap diameter: 2.08 in. (5.28 cm)
    • Weight without batteries: 6.8 oz. (193 grams)
    • Weight with batteries: 13.9 oz (394 grams) batteries sold separately
    • Light Source C4® LED technology, impervious to shock with a 50,000 hour lifetime
    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
    • Regulated run time provides consistent performance throughout battery life
    • Sealed push-button tail switch design protects it from corrosion caused by battery leakage
    • Combination of visual & mechanical polarity protection ensures correct battery installation
    • Light designed to not power on if batteries are installed incorrectly
    • “Captured locking” set screw helps housing inadvertently being opened in a hazardous environment
    • Set screw goes into metal tray that distributes pressure to protect the body from over-tightening
    • IP64/IPX7 rated; dust-tight, waterproof to 1m for 30 minute
    • 3 meter impact resistance tested
    • Larger size makes the 3C ProPolymer HAZ-LO ideall for situations where gloves are typically worn
    • Colors: yellow or orange

    Approvals:
    UL Classified Class I, Division 1, Groups A,B,C,D
    Class II, Division 1, Groups E,F,G; Class III; Exia; Temperature Code T4
    FTZU 12 ATEX 0183X
    II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T99C Da
    UL-BR 12.0516X
    Ex ia IIC T4 Ga; Ex ia IIIC T99°C
    Meets applicable European Community Directives.

    Learn More
  5. 3AA ProPolymer HAZ-LO® Helmet Kit
    $57.00

    The HAZ-LO® Helmet Lighting Kit is a universal lighting kit that fits both traditional and modern style firefighting helmets. It is a low-profile, lightweight, economical alternative for securely mounting a flashlight to almost any style fire helmet.

    Streamlight Helmet Mount can be used in conjunction with Streamlight's 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights. Durable, lightweight, aluminum mount easily attaches to the brim of firefighterメs helmets with no tools required

    Rubber Helmet Strap can be used in conjunction with Streamlight's 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights. It is a quick and easy, no tools required method to attach your 3AA/4AA ProPolymer flashlight to almost any helmet. Made of engineered high-strength rubber. Also fits hard hats.

    Kit includes:

    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
    • Streamlight Helmet Mount
    • ᅠRubber Helmet Strap


    3AA PorPolymer HAZ-LO Specs:

    • Safety measures: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
    • Combination of visual and mechanical polarity protection ensures correct installation of batteries
    • Light designed to not power on if batteries are installed incorrectly
    • Sealed switch design protects it from corrosion caused by battery leakage
    • C4® LED technology - impervious to shock with a 50,000 hour lifetime
    • ᅠC4® LED Provides 120 lumens; runs 6.5 hours
    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
    • Regulated run time provides consistent performance throughout battery life
    • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
    • O-ring sealed, dust-proof, water-tight enclosure
    • IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes
    • IPX4 for water spray
    • ᅠ3 meter impact resistance tested
    • 3 "AA" alkaline batteries reduce battery and recycling costs by 25%
    • ᅠ7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)

     

    ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum operating temperature of <135°C.

    Learn More
  6. Gear Keeper Flashlight Retractor

    Starting at: $23.00

    Gear Keeper Flashlight Retractors insure your Flashlight is secured and easy to find.  Grab your light, use it, let it go… It retracts back.  It is always in the same place when you need it.  Simply extend the tether for easy use and eliminate the risk of lossing your light or having to re-clip your flashlight after every use. Ideal when using your flashlight and you need to let go to use both hands!  Now that describes a firefighter or medic on just about every call now doesn't it!

    Flashlight Retractors
     

    RT2-4412

    Small

    RT4-4412

    Medium

    RT3-4401

    Large

    RT3-4405

    Vulcan LED Box Light

    Attachment Heavy Duty Snap Clip Aluminum Carabiner
    Light size 4AA to 2C 3C to 8AA 3C to 4C & Rechargeables Fire Vulcan LED
    Retract Force 12 oz. 16 oz. 24 oz. 36 oz.
    Cable Ext. Length 20" 22" 32" 18"
    Lanyard Material Nylon coat stainless steel cable Nylon Line w/ Kevlar Core
    Lanyard Breaking Strength 60 lbs. 80 lbs.
    Spring & Hardware Stainless steel

     

    Learn More

Grid List

Set Descending Direction

6 Item(s)