Plug n' Dike Plug Rug

Plug N Dike Plug Rugs give you a pre-made leak stopper for larger holes or even catch basins.

Plug Rugs consist of a top Polyethylene liner and a bottom layer of Plug N Dike. Plug N Dike paste instantly sticks to metal drums and fuel tanks. Stops leaks during emergency spills, protecting workers and the environment.
•   Low-temp Plug N Dike works in cold temperatures.
•   Temperature Range: 5°F (-15°C) to 150°F (66°C)
•   Bentonite Glycol mix provides excellent chemical resistance for fuel leaks.
•   No surface preparation required, easily sticks to dirty or rusty surfaces.
•   Plug Rugs are pre-made and ready to use immediately.
•   Primarily used for fuels and non-miscible solvents.
•   Materials: Bentonite, Glycol, Polyethylene Liner
•   Plug Rug includes set of protective disposable gloves
*** Not recommended for plugging containers of antifreeze, acids, caustics, or oxidizers.

Plug Rug Dimensions:
•   8"x8" - Weight: 1 lb.
•   16"x16" - Weight: 8 lbs.
•   16"x24" - Weight: 12 lbs.

Notes:
•   Visual inspection of Plug Rug’s is recommended after 3 years
•   Plug Rugs should not be stored below 32° F
•   Single use only. Not intended to be reused.
•   Once opened or used it is no longer suitable for use
•   Plug Rugs have a shelf life of approximately 5 years from the date of manufacture
•   Store unopened and not in direct sunlight.