ET-2.0 Low Pressure Pump
ALL TNT Rescue tools and pumps are fully compatible with Hurst, Genesis, Holmatro and Amkus equipment. Use your current pump with TNT Rescue Tools or use your existing Rescue Tools with a TNT Pump, your choice.
100% interchangeable and 100% Lifetime warranty on all TNT Rescue Equipment.
ET-2.0-LP Bantam Power Unit (Electric Motor)
• Phosphate Ester or Diethylene Glycol Hydraulic Oil 5,500 PSI (379 BAR)
• Lightweight and easy maneuverability
• Small and compact for convenient storage
• Two-tool connection
• Alternate tool operation
• Supercharged Hydrostatic 2 stage radial piston pump
• Leeson electric motor
• Roll cage
• Standard Couplers
| ET-2.0-LP Bantum Specifications | |
| Max. Operating Pressure | 5,500 psi / 379 bar |
| Length | 24 in. / 609.6 mm |
| Width | 12.0 in. / 304.8 mm |
| Height | 13.5 in. / 342.9 mm |
| Weight | 80 lbs. / 36.3 kg |
| Motor | 2.0 HP Leeson Electric (Fan Cooled) |
| Voltage | 110 / 220 Volt |
| Min. Run Watts | 2,500 |
| Min. Start Watts | 5,000 |
| Max. Amp Draw (110 Volt) | 17 Amps |
| Max. Amp Draw (220 Volt) | 11 Amps |
| RPM | 3,450 |
| Hydraulic Pump | 2 Stage Radial Piston Over Piston |
| Tool Operation | 2 Tool Alternating Operation |
| NFPA 1936 2010 Edition Compliant | Yes |
| Alternating Mode (Per Tool) | |
| 1st Stage Setting | 3,200 psi / 220 bar |
| 1st Stage Flow | 165 cu in./min - 2,703.9 cc/min |
| 2nd Stage Setting | 5,500 psi / 379 bar |
| 2nd Stage Flow | 50 cu in./min - 819.4 cc/min |
SHIPPING NOTE: Due to the size/weight of this product, shipping/truck delivery must be arranged by phone or email. You may complete your order online, however there will be no shipping charges displayed at checkout. A First Out Rescue specialist will contact you to make delivery arrangements and give you the final cost for your order including freight charges.